Cart 0
Your cart is empty.
Schure Slide, Rigid

Schure Slide, Rigid

ProductID: 800-0071


Schure Slide, Rigid is smooth-surfaced and extremely durable patient transfer system. After being placed under a patient, personnel can effortlessly slide the patient from one gurney or table to another without lifting, the prime cause of back injury among hospital staff. Patented.

  • Reduce back injuries and increase patient comfort
  • Non-disposable, no need to waste red bags
  • Won’t stain – spray and wipe clean
  • Speed up turnover time – hang Schure Slide in every O.R.
  • Radiolucent and not made with natural rubber latex
  • 33"L x 22"W x 3/16" (84cm x 56cm x .5cm)

Important! Please note that the Schure Slides are made for sliding a patient from one surface to another and are not constructed to support patient weight.

Copyright Notice
All rights reserved. Any duplication, adaption or translation without prior written consent is prohibited unless otherwise provided for in the relevant copyright laws.

SCHURE SLIDE, RIGID, 33"L x 22"W x 3/16"  800-0071

Initial Release: 

452 Randolph Street, Abington, MA 02351 USA 
Toll Free
 (888) 724-8763 | Ph (781) 982-7000 | Fax (781) 982-7001 |

Authorized Manufacturer
Emergo Europe Prinsessegracht 20, 2514 AP The Hague, The Netherlands


Product Use Warnings
Hazard resulting from incorrect use. Be absolutely sure to follow the instructions for use for your Operating Table system.

Become familiar with the features of patient positioning device before use with a patient. Always practice use on a nurse, physician or appropriate volunteer prior to using clinically.

Clean Sheet Transfer
  1. Lock stretcher against procedure table, gently pull draw sheet up, tilting the patient up on the patient side. Position the Schure Slide under the draw sheet, then lower the patient down
  2. Using the draw sheet, steadily slide the patient over the Schure Slide to transfer table
  3. Gently remove the Schure Slide from beneath the patient
Soiled Sheets Transfer
  1. Lock stretcher against procedure table, take a clean draw sheet and wrap it around the Schure Slide covering 3/4 of the bottom side of the slide
  2. Gently tilt the patient up on the patient side, leaving the soiled sheets down. Position the Schure Slide and clean draw sheet beneath the patient, directly under torso
  3. Medic #1 pulls draw sheet, white Medic #2 pushed patient, sliding the patient over the Schure Slide onto the transfer table
  4. Remove the Schure Slide from beneath the patient
Cleaning Instruction
  1. Spray and wipe clean with hospital approved disinfectant

Intended Use
The intended use if for personnel to effortlessly slide the patient from one gurney or table to another, eliminating the risk of back injury while increasing patient comfort dramatically. 

General Specifications
Device Dimensions (maximum)
  • Length: 33” +/- 0.05”
  • Width: 22” +/- 0.05” 
  • Depth: 3/16 +/- 0.05”
  • Device Weight: 1 lb +/- 0.5 lbs 
  • Single person installation
Overview of Components
The Schure Slides enables personnel to easily slide the patient from one bed to another.
Other required products for use: N/A 

General Information
  • Product not made with (NRL) Natural Rubber Latex
  • Product warranty covers product from manufacturing defects for period of 2 years
  • If damaged in shipping, call Customer Service at (888) 724-8763 or (781) 982-7000 to obtain Return Material Authorization (RMA) number. For product warranty issues, contact Customer Service.
  • Product is maintenance-free, check product condition before next use
  • Life of device is 5 years under normal use
  • Store device between –4 °F to +86°F 
  1. General - Prevent infection by cleaning and disinfecting product before disposal
  2. Packaging - Dispose packaging material via household waste according to national requirements
  3. SchureMed accepts back used or retired products - or dispose of product in accordance with national requirements

Available Combo Deals